HOME > Product Category > TA/TLA/LA Series > TLA16/ TLA25/ TLA32(H)

Quantity:
TLA16/ TLA25/ TLA32(H)

  • Special Attachments

  • Technical Data

  • Dimensions

    		•
    FEATURES:
      *Max. collet capacity:
      • 25mm round for LA25/TLA25/TA25
      • 32mm round for oversized LA32(H)/TLA(H)/TA32(H) machines
      • 16mm roundfor TA16/TLA16
      *Spindle speed:
      • LA25/ TLA25 150 to 4,200 rpm by 40 steps
      • LA32/ TLA32 150 to 4,200 rpm by 32 steps
      • LA32(H)/ TLA32(H) 210 to 2,300 rpm by 28 steps
      • TA16 700 to 7,500 rpm by 20 steps
      • TLA16 200 to 6,000 rpm by 40 steps
      • TA25 550 to 4,200 rpm by 12 steps
      • TA32(H) 300 to 2,700 rpm by 12steps
      *Cross slide with toolholders, front and rear
      *Double vertical slide with toolholders
      *Tailstock with A-3 collet quill, draw bar and spring retraction
      *Weight operated bar feed
      *Adjustable swing stop
      *Change gears set for feeds
      *Automatic electrical shut off feed driven clutch and bar feed
      *Cam setting dial
      *Transparent coolant splash guard, front and rear
      *Waterproof sealed fluorescent work lamp
      *Oil resisting timing belt drive, spece counter for Mod. TLA16 / LA25 / TLA25 and LA32(H) / TLA32(H), good for drilling, reaming and theading operations during a working cycle.
      *(H) models, the spindles are designed with hydraulic chucking system, and the mechanical chuck levers are not required.
      *Available with or without the following special attachments: longitudinal turning, two-position air operated tailstock, four-postition mechanical turret, thread/polygonal milling, gravity silent bar feed ect.
      *Standard type A15 / 25 TRAUB cams and tooling can be used and interchanged.