|
The single spindle automatic lathe model TA,
TLA and LA, are used for the manufacture of a great variety
of simple, bolts, screws, unts, sleeves,...etc., all kinds
of materials such as steel, brass, aluminum etc. can be
machined on automatic lathes.
The model LA25, can machine round and profiled bars up to
a max. diameter of 25mm(1"), TA25 having the same range
of application. The models LA32(H) and TA32(H) have a spindle
capacity of 32mm(1-1/4") with hydraulic stock chucking,
bar material up to dia. 32 mm can machined. TA16 is for
small material stock up to 16mm(5/8") and high speed
turned parts.
For secondary operation of pre-machined parts, the automatics
can be equipped with a magazine feed attachment or a hand
chucking device if only small volume are involved.
The working scope of the basic machine can be extended considerably
by the application of the various attachments.
|
|
TA16/ TA25/
TA32(H)
TLA16/ TLA25/ TLA32(H)
|
|
|
|
FEATURES:
Max. collet capacity: 25mm round for LA25/TLA25/TA25,
32mm round for oversized LA32(H)/TLA(H)/TA32(H) machines
and 16mm roundfor TA16/TLA16
Spindle speed:
| |
LA25/ TLA25 |
150 to 4,200 rpm by 40 steps |
| |
LA32/ TLA32 |
150 to 4,200 rpm by
32 steps |
| |
LA32(H)/ TLA32(H) |
210 to 2,300 rpm by 28 steps |
| |
TA16 |
700 to 7,500 rpm by 20 steps |
| |
TLA16 |
200 to 6,000 rpm by
40 steps |
| |
TA25 |
550 to 4,200 rpm by 12
steps |
| |
TA32(H) |
300 to 2,700 rpm by 12steps |
Cross slide with toolholders, front and rear
Double vertical slide with toolholders
Tailstock with A-3 collet quill, draw bar and spring
retraction
Weight operated bar feed
Adjustable swing stop
Change gears set for feeds |
Automatic electrical shut off feed driven
clutch and bar feed
Cam setting dial
Transparent coolant splash guard, front and rear
Waterproof sealed fluorescent work lamp
Oil resisting timing belt drive, spece counter for
Mod. TLA16 / LA25 / TLA25 and LA32(H) / TLA32(H), good
for drilling, reaming and theading operations during
a working cycle.
(H) models, the spindles are designed with hydraulic
chucking system, and the mechanical chuck levers are
not required.
Available with or without the following special attachments:
longitudinal turning, two-position air operated tailstock,
four-postition mechanical turret, thread/polygonal milling,
gravity silent bar feed ect.
Standard type A15 / 25 TRAUB cams and tooling can be
used and interchanged. |
|
|
