|
Model
|
LNC42
|
LNC65
|
|
|
Metric(Inch)
|
Metric(Inch)
|
| CAPACITIES |
| Collet bar capacity, dia(through bore) |
Ø42 (1.65", 1 5/8")
|
Ø65 (2.56", 2 9/16")
|
| Swing over bad |
Ø260 (Ø10.2")
|
| Swing over alide |
Ø150 (Ø5.9")
|
| Max. turning diameter.(3-jaw power chuck) |
Ø165 (Ø6.5")
|
Ø210 (Ø8.3")
|
Max. turning length
(Turret type) |
collet |
205(8")
|
| 3-jaw power chuck |
180(7")
|
165(6.5")
|
Max. turning length
(Gang type) |
collet |
280(11")
|
| 3-jaw power chuck |
255(10")
|
240(9.5")
|
| SPINDLE |
| Height of spindle center (approx.) |
1030(40.55")
|
| Spindle nose |
ISO A2-5
|
ISO A2-6
|
| Collet chuck type |
F48(Ø42)
|
F72(Ø65)
|
| Power chuck reception |
6"
|
8"
|
| Spindle/ draw bar through bore |
Ø53(Ø2.09")
/Ø43(Ø1.69")
|
Ø78(Ø.07")
/Ø66(Ø2.6")
|
| SPINDLE DRIVE |
| Motor power cont.(Mitaubishi/Siemens) |
7.5/10kw (10/13.4HP)
|
| Max. spindle speed |
5000rpm
|
4000rpm
|
| SLIDE |
| Longitudinal slide travel(Z-axis) |
300(11.8")
|
| Cross silide travel(X-axis) |
300(11.8")
|
| Resolution |
0.001(0.0001")
|
| TOOL TURRET |
| Number of tool positions |
8
|
| Turning tool section |
↵20 (↵3/4")
|
| Boring tool reception |
Ø25 (Ø1")
|
| Indexing |
0.35
|
| SERVO MOTORS |
| Working feeds, X axis and Z |
0~10000 mm/min (0~394 in./min)
|
| Rapid traverses, X axis and Z |
15 M/min (590in.min)
|
| Feed force, X-axis and Z (Mitsubishi/Siemens) |
5Nm(1.0kw/1.4kw)/3.68lb-ft(1.334
HP/1.87 HP)
|
| MACHINE SPACE, WELGHT and POWER REQUIREMENTS |
| Overall dimension (LxWxH) |
2000x1500x1700(78.7"x59.1"x66.9")(1800
Siemens)
|
| Approx. net weights of machine with
electrical. cabinet(G.W.) |
1850 kg(4070 lbs)
|
1950 kg(4290 lbs)
|
| Machine weight |
2200 kg(4840 lbs)
|
2300 kg(5060 lbs)
|
| Packing size |
7.5m3 (24.6ft3)
|
| Hydraulic tank capacity |
30 L (0.79 gal.)
|
| Hydraulic tank capacity(Rotary tool) |
40 L (1.05 gal.)
|
| Hydraulic pump motor |
0.75kw (1 HP)
|
| Hydraulic pump motor(Rotary tool) |
3.75kw (5 HP)
|
| Coolant tank capacity |
150 L (3.96 gal.)
|
| Coolant pump motor |
0.375 kw (0.5 HP)
|
| Lubrication capacity |
2 L, 10c.c./10min
|
| Total power required (Mitsubishi/Siemens) |
11KVA
|
