|
Model
|
LNA36
|
|
Unit
|
Metric (Inch)
|
| CAPACITIES |
| Collet bar capacity, dia.(through bore) |
Ø36 (1.42")
|
| Swing over bad |
Ø150 (Ø5.9")
|
| Swing over alide |
Ø350 (Ø13.8")
|
| Max. turning dia.(3-jaw power chuck) |
Ø125 (Ø5")
|
| Max. turning length |
100(4")
|
| SPINDLE |
| Height of spindle center (approx.) |
1,000(39.4")
|
| Spindle nose |
A2-4
|
| Collet chuck type |
F42
|
| Power chuck type |
Ø5"
|
| Spindle/ draw bar through bore |
Ø37(1.46")
|
| SPINDLE DRIVE |
| Motor power cont.(Mitaubishi) |
3.7/5.5kw (5/7.5 HP)
|
| Max. spindle speed |
6,500rpm
|
| SLIDE |
| Cross silide travel(X-axis) |
200mm(8")
|
| Longitudinal slide travel(Z-axis) |
200mm(8")
|
| TOOL |
| Turning tool section |
20mm Sq.
|
| Boring tool reception |
Ø25mm(1")
|
| SERVO MOTORS |
| Working feeds, X-axis and Z |
0~10,000 mm/min
|
| Rapid traverses, X-axis and Z |
15 M/min
|
| Feed force, X-axis and Z (Mitsubishi) |
4Nm
|
| MACHINE SPACE, WELGHT and POWER REQUIREMENTS |
| Overall dimension (LxWxH) |
1,530 x 1,260 x 1,620 (60.2"x19.6"x63.8")
|
| Machine weight |
1,260 kg
|
| Hydraulic tank capacity |
30L
|
| Hydraulic pump motor |
0.75kw
|
| Coolant tank capacity |
180L
|
| Coolant pump motor |
0.187kw
|
| Lubrication capacity |
2L, 10cc/10min
|
| Total power required (Mitsubishi) |
8kVA
|
